Atlas Copco
Model: "RH 656"
Pusher Leg Pneumatic Rock Drill
Model |
Shank Size |
Part Number |
MSRP |
|
RH 656 |
H22 Rotation |
8311030345 |
 |
|
 |
 |
 |
 |
 |
 |
DESCRIPTION:
Atlas Copco water flushed, pusher leg mounted rock drills are designed for driving drifts and tunnels with a small cross section. These well-proven rock drills are recognized for their high performance and reliability. They are intended for use for hole diameter range of 27 to 41 mm with H22 rotation chuck as a standard.
When used with Atlas Copco tapered button bits, penetration rate will improve some 25-50% compared to conventional integral steels and have three to five times longer service life.
Customers who purchased this product also purchased:
 |
 |
 |
Place Your Order Today!
800-241-9669
Click on the CATEGORIES below for more detailed information:
|
|
 Replaceable Tip TAPER Rods |
"TC" TAPER Rock Bit |
"TB" TAPER Rock Bit |
|||
Length Under Collar |
"BT" Series |
For broken and rough rock. |
For fast penetration. |
||
Inches |
7/8" x 4-1/4" Shank |
BITS SHOWN FIT ALL TAPER RODS
|
|||
Part Number |
Diameter
|
Part Number |
Diameter |
Part Number |
|
12" |
BT-1 |
1-1/4" |
TC-125 |
1-1/4" |
TB-125 |
18" |
BT-1.5 |
1-3/8" |
TC-138 |
1-3/8" |
TB-138 |
24" |
BT-2 |
1-1/2" |
TC-150 |
1-1/2" |
TB-150 |
36" |
BT-3 |
1-5/8" |
TC-158 |
1-5/8" |
TB-158 |
48" |
BT-4 |
1-3/4" |
TC-175 |
1-3/4" |
TB-175 |
60" |
BT-5 |
1-7/8" |
TC-178 |
1-7/8" |
TB-178 |
72" |
BT-6 |
2" |
TC-200 |
2" |
TB-200 |
Atlas Copco RH 656 Safe Operation Manual
